PORTABLE
TIME OF GAME
COUNT DOWN CLOCK

The Neptune Dynamics Ltd. Portable Time of Game Clock is an easy convenient way to clearly display the Time of Game remaining for many sports. Used for Lacrosse, Soccer, Water Polo and other sports. Any period length up to 99 minutes is displayed brightly in minutes and seconds as the time counts down.

Convenient wireless remote control starts and stops the clock with play. The unit can be reset from the remote only at zero time. Portable operation with optional battery packs allows game time in locations without power. Convenient power supplies can be used in those locations with easy access to power.

Neptune Portable Time of Game Clocks are designed for simple assembly and use. The displays have convenient brackets for hanging which also serve as the siren mount and for latching the two displays together for safe transportation and storage. The battery-powered remote control provides a convenient method for the time keeper to pause the clocks. As radio waves are blocked by metal objects, the hand-held remote control should be kept in an open area. Button presses should be deliberate, not quick pecks at the remote.
(The 9-volt battery should be fresh. Weak batteries may cause poor operation.)

The mounting brackets on the top of the clock provide a place to attach the siren. The quick release pin is used to anchor the mount to the bracket. This same pin is used to hold the two displays together face to face when not in use. The pin should be installed from the outside edge of the clock facing inwards. The siren does not need to be removed from the clock for storage. Connecting the clock is a simple matter of connecting the siren and the power cord. The siren cord plugs into the upper jack on the right hand side of the clock. Note that this plug is a 12 VDC power source while the horn is on. DO NOT plug speaker equipment into this socket. The power cord plugs into the lower jack on the right side of the clock and provides 12 Volts DC. (The center pin is positive.)

Indicator LEDs identify clock status. Green LEDs show clock display unit has "POWER". Model No.: TOG4004 New Clocks are factory set. To set the Receiver Code for replacement transmitters—version 5.X: Press and hold “PROGRAM MODE” button, apply power by plugging in power supply. Release “PROGRAM MODE” button when “1” appears on right hand display. A “0” will alternate while the clock is learning the transmitter code. Press and hold red button on the transmitter until “1” appears again. Release the button on the transmitter to complete the learn process. Clock is ready to use.

YELLOW LED “SERIAL” Operation: Red button on remote control starts and stops time of game clock countdown. Black reset button only operates at zero time. The Clock can be reset at any time by manually pressing reset button on clock side; or by disconnecting power, waiting 5 seconds and reconnecting power.

To Set Time Range (1-99 minutes): To change time range, you will need to use the 3 holes on the side. Use a pen to press the buttons. When the display is plugged into power, enter "PROGRAM MODE", press and release the bottom button. The current minute range will flash on left hand clock. Press the "RESET" button (top) to increase time range. Press "PAUSE" button (middle) to decrease time range. When desired Minutes are displayed, press "PROGRAM MODE" button to save Minutes, Seconds display will now flash on right hand clock. Use the pause and reset to go up or down to desired seconds. Press "PROGRAM MODE" button to set seconds. Flashing stops. Clock is now ready to operate. Once set, Time Range will remain at that value until range is manually reset.